TITLE:
Finalize the Inverter Circuits
OBJECTIVE:
To assemble the components.
Solder th components leg
To test the circuits
To placed the inverter circuit and transformer in 1 place.
DISCUSSION/ANALYSIS:
Before assembling the component. I have to check the polarity of the each components such as positive and negative of the diodes, the capacitor, the e-b-c for transistor to avoid misplaced which can damage some of the components. Place the component correctly and do double check before soldering
Soldering one by one and solder the components leg carefully to avoid damage of the circuit and the components itself. After done soldering all the components leg are not being cut for future arrangement if the mistake or misplace occurs.
Before assembling the component. I have to check the polarity of the each components such as positive and negative of the diodes, the capacitor, the e-b-c for transistor to avoid misplaced which can damage some of the components. Place the component correctly and do double check before soldering
Soldering one by one and solder the components leg carefully to avoid damage of the circuit and the components itself. After done soldering all the components leg are not being cut for future arrangement if the mistake or misplace occurs.
Every electronics and electric can harm people. so it must have the cover, a safe one. After successfully construct the inverter i decide to place them together and sealed as well for unreachable from people and to make my projects have a safety precaution.
I decide to make the cover from acrylic (pro-spec) because it easy to cut them and place the plug, fan and whatsoever in one place.
CONCLUSION:
The inverter circuit input and output have been tested and checked. There is no problem for the circuit. the cover for the circuit also have been build and as well as the plug and fan have been installed altogether in one box. Proceed to next stage.
No comments:
Post a Comment