Semester 2 Week10

TITLE:

Building the custom made generator


OBJECTIVE:

To investigate the output generator
To construct the generator
To test the generator


CONTENT:

Previously, im failed to build the generator which give no output voltage. i seek for my supervisor helps and ask him about the problem im faced. He told me to to this in order to make the generator. First i have to cut the plywood into a circle and as well as pro-spec to place the magnet and coil later. second i turn the coils 200 turns each with 3 anti clock wise turn and another 3 clock wise turn. third, i placed the coil 60 degree from each other with clock wise and anti clock wise intervals and connecting in series. fourth, place the magnet interval with north and south. here is the results

neo dymium magnet

Thr coil with clock wise and anti clock wise intervals

CONCLUSION:

The generator making is done and the voltage output are not high enough, it only can produce about 1.2V by rotating faster by hand. so i think it is not enough either voltage or current even i put much magnet or turn of the coils so i decide to stop wasting or finding due limited time. My supervisor advice me to use the alternator kancil to apply to my projects. I will move on what my supervisor said which just use the alternator kancil as a generator.