Semester 2 Week 9

TITLE :

Making the generator.

OBJECTIVE:

To build the 12V custom generator.

CONTENT:

this are the materials needed for making the generator.

1) magnet

2)copper wire

3)glue

4)pro-spec

5)plywood

6)cable tie



Basically, in order to make any type of the generator, the concept is the same.
here is the useful  link that help me to make my generator.

http://www.miniscience.com/kits/woodengenerator/index.html

this link, teaches how to make wooden generator and some justification on why the problem occurs when testing the generator.

i followed the steps from the above links, but had adjusted a bit because i'm not making wooden generator. The design of my generator and the materials i'm using doesn't imitate from the links due to my design the and environment place which where i placed does not suitable for wood generator (hydro generator).

1) i make 6 coils where each coil contains 200 turns

2) i attached 6 neo-dynium magnet to a circle  pro-spec using glue.

3) i attached those 6 coils onto the plywood using cable tie.


CONCLUSION;

Making the generator is done but still need to  test the generator because i need o know how either its working or not and how many the voltage being produce and minimum rp. that i need in order to produce 12V.